Home > Product > WTC-2002
 
 


Target Character
for Recognition
Recognition Rate


Capturing Range
Recognition Speed
Installed Place
Detection of Vehicle
Entering
Image Signal
Input Image Resolution
Built-in Processor in the VLPR
Built-in Memory
Lingting
Speed of passed Vehicle
Charging Time for Lighting Apparatus
Used Camera
Connection with in and around machinery


Power Consumption
Installation Method
Operation Temperature
Weight
Dimension
| The Whole Characters within the license plate
| * Area Code, Purpose Code, Kind of Vehicle Code, Serial No.
| Max. more than 95%
| * excluding contaminated or damaged license plates
| * Incline of license plate : vertical within +15 ¡Æ
| 7m ¡¾ 3m
| Within 0.5 Sec.
| Indoor and Outdoor
| Digital Input

| NTSC Digital Interface
| 1300(H) x 1030(V)
| Pentium Processor

| Memory for Operation : 128 MB
| 250W / Sec. (Lighting Control Device built-in)
| 0 ~ 250 Km

| Within 0.5 Sec.

| Progressive Scan Digital Camera
| Digital Input : 4 points
| Output : 4 points (including Lighting Control Device)
| Host Connection : 37 Pin Connector
| Motor Control : Zoom, Iris, Focus, Pan/Tilt
| AC 220V ¡¾ 10% (50/60 Hz)
| Standalone or Built-in the Panel
| -25¡É ~ 70¡É(-50¡É ~ +70¡É when heater is work
| 4 Kg (excluding the Camera and the Lighting Apparatus)
| 186mm(W) x 290mm(H) x 320mm(D)

 

 


 
Radiation Energy
Life time of Lamp
Charging Time
Researching Range
Radiation Substitute
Consumption Power
Consumption Electricity
| 250 W/Sec.
| 200,000 Times
| 0.5 Sec.
| 10 Meter
| 720 nm
| AC 220 ¡¾ 10 %
| 250 W (1 time Electric Discharge/Sec.)

 


 
Detection Method
Detection Speed
Sensitivity Control
Frequency Control
Auto Control Function
Response Speed
Presence Time Setting
Reset Method
Consumption Electric Current
| Fain safe
| 0 ~ 250 Km/Hour
| 4 Stages
| 4 Stages
| Perfect Automation (20 ~ 1500 H)
| 10 milisec.
| limited Presence / Permanent Presence
| Separate Recet Switch available
| under 500mA

 

 


 
Image Size
Effective Pixels
Pixel Size
Output Signal Mode



Scanning Mode
Synchronization Method
Synchronization Frequency
External Input Synchronization
Video Outputs




Power Source
Consumption Power
Lens Mount
Resolution
S/N Ratio
Sensitivity



Sampling Resolution
Gain Adjustment
Gamma Compensation
Shutter Mode
Shutter Mode
Shutter Speed
External Control Mode
SYNC Reset Mode
Operating Temperature/ Humidity
Dimension
Weight
| 2/3£¢ Interline CCD (8.7 x 6.9 mm)
| 1300(H) x 1030(V)
| 6.7(H) x 6.7(V) §­
| Analog Output : 15Hz Non-Interlace with synchronization
| Digital Output : 15Hz Non-Interlace(Sync Signal: VD, HD, CLK
    output simultaneously).
| RS-422A 10Bit Parallel / EIA-644 10 Bit
| Non-Interlace Mode 1/15 Sec.
| Internal / External (Automatic Switching)
| fh : 15.750 KHz        fv : 15Hz

| HD/VD TTL Input

| Analog VS 1.0 Vp-p / 75§Ù
| Digital RS-422A Standard / EIA-644 Standard
| CLK, HD, VD, DATA (10Bit Parallel Circuit)
| CLK Rate :24.570MHz(Standard), 12.285MHz(1/2 times),                    6.1425MHz(1/4 times)
| DC 12V (11 ~ 16V)
| 5 Watt
| C - Mount
| (H) : 1300 Pixels / (V) : 1030 Lines
| more than 50 dB (GAIN 0dB, ¥Ã = 1)
| Standard Illumination approx, 150Lux, F8
      (Gain 0dB, without IR removal Filter, Shutter OFF)
| Minimum Illumination 0.3Lux, F1, 4
      (Gain + 24dB, without IR removal Fillter, Shutter OFF)
| 10 bits
| Manual Adjustment (0 ~ 24dB)
| ¥Ã = 1
| Normal Shutter
| Random Shutter
| 1/16000 ~ 1/15(10 Stages)
| RS-232C (Optional)
| Reset / Non-Reset
| -25¡É ~ 70¡É

| 46(W) x 42(H) x 84(D)mm
| Approx, 200g
 


 
Camera Size(CCD)
The Focal Distance
Maximum Caliber Rate
Iris Control Method
Focus Control
Minimum Focal Distance
| 1 inch ~ 1/3 inch
| 25.0mm
| 1 : 1.3
| VIDEO Drive, F1.3 ~ 360, Speed : 1.5 Sec
| Passive Control
| 0.5m