※There are guiding principles for safety and regulations for preventin accidents Which we should obey in installation and operation of GT-2031-5 as follows.

 Inprinciple, the ground concrete work should be executed by the client in accoredance with teh drawings provided by Winner Technology Co., Ltd. and also it can be carried out construction work by Winner Technology according to the client's request with a separate expense.

The distance between the end of barrier gate arm and the nearest building should be over 500m at the least.

The client should lock the housing without fail after finishing the test operations of all the barrier gates for behicle.

Tht installer should watch the operation of opening and closing by all means during the test operation. It is prohibited to attach and other operative element to invisible spot. The field of vision between the barrier gate and the remote control system should be secured.

No other person and obhect are allowed to be within the swing scope of the barrier gate arm while the barrier gate is being operated.

If the length of barrier gate arm is more than 3.5m, an extra support post should be installed at the ending point of the barrier gate.



The fizing of barrier gate should be firm enough to endure the wind force of maximum 10(500N/㎡) in front.

Power Supply and Wiring

After having been finished installation of the system, power supply and wiring are carried out according to the description provided along with the product. The controller for barrier gate of Winner Technology may need a special wiring according to using method and purpose.
And this can be supplied by Winner Technology, if needed.