Home > Product > Barrier Gate(GT-2031-5)
 
 
 

 


Barrier Gates of Winner Technology have been installed in parking lots of various purposes and in the entrances and exits for vehicles passage and acknowledged an excellent technical power. It is composed of a reliable AC motor, drive mechanism and control system.

GT-2031-5 can be opened and closed in a very short time(within1.5 sec.) without shaking the edge of the arm. Opening and closing of the gate are managed by vertical safety device and in case of power failure, the gate can e opened and closed easily by manual operation using a lever in reserve.

GT-2031-5 has a perfect and reliable all-in-one drive mechanism and the mechanism can be separated easily from the housing by removing the bolt for drive mechanism separation.

 
 
 
The spring mechanism built-in GT-2031-5 keeps the exact level power of barrier gate arm. Also, the length of the spring can be set up according to the one of the arm at its factory before delivery of the product. the spring can be set up easily again according to the combination of system,it can be set up again. GT-2031-5 has a pivot which determines the running direction of arm and it can be set up again. GT-2031-5 has a pivot which determines the running direction of arm and it can be easily replaceable from the right to the left so that you can select the direction of the barrier gate freely depending on the circumstances of the site.
GT-2031-5 can ensure safety of the cars and barrier gates in case direct data transmission or power supply to the barrier gate stops due to power failure or any other server down, etc.
For instance, if the barrier gate gets an impact by minor collision with car, the P-bolt, which is connecter of a mechanism and a bar, is cut so that the bar may elastically turn on a level with the central axis, therefore, this system can prevent structural transformation of the Barrier Gate and can ensure safety of the cars.
 
 
Operation Method
   |  Automatic - Automatic operation by the signal of loop detector

 

    |  Manual - It can be opined/closed by the internal/external switch
   |  In case of power failure - It can be opened
   |  /closed by manual method
Driving Method
    |  Motor, Deceleration Machine, Crank Pivot
Weight
    |  About 60kgs (including barrier arm)
Control Device
   |  Motor, Deceleration Machine, Crank Pivot
   |  This control device is adopted only for them.
     |  It has communication function and relay output built-in
   |  It has digital input built-in.(sensor, loop detector,
   |  open/close possible
Operation Speed
    |  Within 1.5 seconds
A R M
    |  Aluminum flat arm(rubber pad is attached
   |  at the lower part of the arm)
Safety Device
   |  It detects vehicles associating loop coil with loop detector.(standard)
Input Voltage
   |  AC 220V ± 10%, 50/60Hz
Consumption Power
   |  Maximum 250Watt
Operation Temperature
   |  -30℃ ~ 50℃, 10% ~ 90%(without congelation)
Protection
    |  Outdoor standalone waterproof type
Material of Case
    |  Steel 2.0mm (optionally stainless steel 1.6mm)
Coating Method
   |  For outdoor use power coating