Home > Product > TDR-4011
 
 

 


TDR-4011, the recycling ticket dispenser Winner Technology provides issues parking tickets be printed diverse information include with vehicle entering time, equipment number and parking lot number.

The printed information in recycling parking ticket is can be erasing by ERT-4000 (exclusive erasing machine of Winner Technology) and can be reuse above 500 times.

Especially, the recycling ticket has 2750 Oe the high coercivity that can prevent loss of the recorded information in it. In addition, it made by PET the unchangeable materials even by intense solar heat.

TDR-4011 can issue general tickets and read regular tickets and event tickets by the same slot and can be integrated with proximity card reader or Mifare card reader easily according to your purposes.

 
 

TDR-4011 is an environmental familiar system replaces disposable paper ticket system.
     It adopted a high reliable up-to-date mechanism can overcome the poor surroundings
    of parking lots.
The recycling ticket can be reused from 500 times to thousands of times according to
    the managing method so that the owners of parking lots can reduce operating cost and
    can supply pleasant parking spaces to their customs.
Special thermal printing method can preserve clear print constantly and you can have
    it print event information or interim calculation process on the tickets.

The recycling ticket made by PET so that it has intense elasticity and excellent
    thermostability can keep its original even under the height temperature of the inside
    of vehicles.
The thick of ticket is thin (0.2mm) so that you can stack a number of tickets in a ticket
    cartridge. And the issuing mechanism writes diverse information on the magnetic stripe
    of the ticket's reverse side.

 
 
Ticket Size
Print Method
Stack Quantity
Method of Ticket Stack
Warning of Ticket shortage
Density of M/G data
Coercivity
Ticket Issuing Speed
Life time of Magnetic Head
Error rate of Magnetic Head
Compensation for TIMP/HUM
Controller



Communication Port

RTC
Operation Temperature
Storage Humidity
Consumption Power
Weight
| 86(L) x 54(W) x 0.22(T)mm
| Thermal Line Print(300 DPI)
| 1000 sheets
| Cartridge installation
| Under 50 sheets

| 150 BPI
| 2750 Oe ¡¾ 250 Oe
| 1.5 Sec
| 1,000,000 Cycle

| 0.01%

| Built-in fan and heater

| 1) CPU : Microprocessor 18.432 MHz
| 2) Flash Memory : 256 KByte
| 3) Battery : Built-in RTC, SRAM
| 4)Digital In/Out : 40 Parallel In/Out
| 4Ch(RS-232C 3Ch, RS-485 1Ch) Optional TCP/IP Interface
    Available
| Included
| -40¡É ~ -08¡É
| 5% ~ 95%
| Normal 100Watt, max(700Watt when heater is working)
| Approx. 60Kg