Home > Product > Magnetic Ticket Dispenser
 
 



This Magnetic Ticket Dispenser is located at the entrance of a parking lot and provides the visitors with magnetic tickets which include recorded vehicle entering time and serial number.
When a vehicle is detected on loop coil, the system outputs guide messages such as " Press the ticket issuing button."
"Take the ticket." through Voice Guide and VFD or LCD(Option).
In case the parking lot is full of vehicles the system can be stopped by external signals such as Fee Calculator, Space Counter or Parking Control Server.

The system allows both automatic issuing method by car detection signal from loop coil and button issuing method by pushing ticket issuing button.

The user who has an RF/ID card can use parking lot without issuing ticket (in case, RF reader option is selected). The Magnetic Ticket Dispenser is stand-alone type but it can be connected with Fee calculator and Control Server, etc. by the communication equipment also.
Integrated with Fee Calculator, RF Reader, Barrier Gate and Loop Coil, etc. this Magnetic Ticket Dispenser enables you to control access of vehicles and collect parking fee.

 
 
   
 
When a vehicle enters the parking lot and is detected by loop coil/
     a detector, it is leaded to take out the ticket along with Voice Guide.
 
According to Voice Guide or VFD, a magnetic ticket is pulled out or
     a regular ticket is recognized
 
Barrier Gate is opened by pulling out a ticket, and it is closed by loop
     coil/ a detector when the vehicle passes.
   
 

When the vehicle exits, the parking fee is being adjusted or the
      regular ticket is being recognized.

 

Barrier Gate is opened and the vehicle exits after the parking
      fee is adjusted.

 

The barrier gate is closed after the vehicle leaves the loop coil.

 


 
 
Ticket Capacity
   |  5,000 tickets

Ticket Issuing Method

   |  Automatic Issuing/Button Issuing
Issuing Speed
   |  Wihtin 2 sec. from issuing signal
Operation Guide
   |  Voice Guide and VFD Messages for issuing and parking
   |  state(FULL)
Printer
   |  Printing Method ¡æ Ink-jet Method
   |  Printing Contents ¡æ Entering Time/Ticket Serial Number
Compensation for Power Failure
   |  Compensation Function for Power Failure built-in
   |  (Semi - permanent)
Signal Input/Output
   |  Serial 4Ch / Input 8Pin / Output 8Pin
Housing
   |  Stand-alone Water-proof / Steel 1.6t(Powder Coated)
Power Input
   |  AC 220V ¡¾ 10%, 60Hz
Operation Temperature
   |  -20¡É ~ +50¡É, 10% ~ 90%(Without congelation)
Consumption Power
   |  Normal 100Watt, Max. 700Watt(When a heater is operated)